Zhengzhou Kongsin Dental Co,. LTD

Products > Sterilizers & Accessories > > Handpiece Lubricator
Product name : Handpiece Lubricator
Item : KS-HL451
 Enlarge Image                   Back
←[Previous Product]              [Next Product]→


Details:

Feature:

1. It is designed to clean and lubricate the handpiece

2. 3 handpiece can be cleaned and lubricated at the same time

3. The Care 3 Plus swing pinion can clean and lubricate the handpiece efficiently in different angles

4. You can press the Air Button to clean the rest oil after cleaning and lubrication

5. You can fill the oil in different mode, such as short, medium and long mode, according different kinds of handpiece

6. The oil mist filter cotton can prevent the spread of oil mist to the minium degree

 

parameters:

Working pressure0.3 - 0.6 Mpa

Power source220/50V/HZ

Air flow60L/min

Weight7.2 Kg

External dimension282mm*300mm*370mm

Reservoir Capacity350ml

 

Attention of Danger items:

1. Installation, Use and Oil fulfill should be far from exposure and fire

2. Avoided of direct sunshine and 40°C above

3. Avoided of other use that is not mentioned in instruction. Place it on ventilation regularly. If there is any smell, turn off the machine and put it on ventilation in time.

 

Attention of Warm items:

1. Do not touch the wire with wet hands

2. Do not wet the machine to avoid fire or electric shock

3. Do not disassembly or replace component of machine. Please contact with the dealer for after service

4. If there is any smoke or smell of burnt resi n, please turn off the machine immediately and contact with the dealer for help

5. Please put it at horizontal position. Avoid of sudden drop
 

Attention of Safety items:

1. The handpiece should be sterilized after lubricating

2. Keep the machine under 10°C~40°C and humidity of 25~75%RH, away from direct sunshine,

3. Keep 5 cm space around machine when install

4. Air pressure should be under 0.35~0.60Mpa(3.5~6.0kgf/cm²)(50~80psi)

5. Please do not remove oil cap during operation

6. When fulfill the lubricating oil, please ensure the machine is working

7. If the machine stops abnormally, it needs to wait 5 seconds to remove the oil cap


Related Products :
Sealing Machine
KS-SL434
Sealing Machine
Seal320 sealing machine

Seal320 sealing machine
Runyes Autoclave

Runyes Autoclave
Class N Steam Autoclave With Auto Water Supply

Class N Steam Autoclave With Auto Water Supply
Sealing Machine
KS-SL434
Sealing Machine
KS-AT412
Autoclave
KS-AT415
Autoclave
Sella II sealing machine

Sella II sealing machine